Help X
Type or paste drill file into the left text area. Click 'Generate G-Code'. The G-Code will be placed in the right text area.

Drill depth should be entered as a positive number. The top surface of the part should be Z=0. The genrated G-Code will use negative Z values for drill depth

There are a lot of variants to the Excellon file format. This covers all the types I have seen. If you have a valid drill file that does not work, send it to me and I will try to make it work.



Send suggestions and bugs to bdring@eng-serve.com
Safe Z
Drill Depth
Spindle Speed
Feedrate
Input Number Format .
Output Decimal Places
Paste Excellon Drill File HereCut G-Code From Here

 

 

Dring Engineering Services